It is raining again, and you will get a pool on your balcony if it is not properly waterproofed. As a result, you have to check out all the damage related to a leaking balcony. A leaking balcony is a disaster as it can lead to chips, cracks, and it is also a favourite place for mould and mildew. So, how to get rid of these issues? Well, the only beneficial solution is balcony waterproofing.
Though people think it is a DIY task, it is wise to appoint the best balcony waterproofing company to complete the work efficiently. But still, if you wish to do the project yourself, you must understand several factors before doing it. As the waterproofing process requires special attention, you should learn how and when to apply the best material to finish the task efficiently. So, you might be wondering where you will get this information. Well, you can take a look at the below preparation and application methods for this.
Prepare the surface
The best balcony waterproofing contractors first prepare the balcony surface for waterproofing. For this, they have to make sure that the surface is clean, firm, and smooth. They need to wash or vacuum the surface to remove dirt and debris. If it is not cleaned properly, the primer layer cannot stick to the surface adequately. Besides, the experts must eliminate rust that will adhere to the primer coat properly.
Fill joints and crack.
In the second step, the contractor should fill all the joints and cracks with polyurethane sealant and cement. You need to make sure that they have sealed every joint. After that, wait for at least 24 hours. Besides, if you apply quick-dry sealant, you can use it twice after 6 hours.
Apply a membrane layer
Polyurethane sealant alone cannot do everything. So, you should apply a membrane layer in the joints to make waterproofing work effectively.
Begin primer layering
After 24 hours, the company must begin the layer application process. It is one of the vital steps, as you need to select the best coating material to protect your balcony from rain and heat. Take high-quality primer and thoroughly mix it. After that, take a brush or roller to coat the primer to the balcony surface and allow it to dry. After at least 1 hour, apply the second layer and never apply the primer over the wet surface. It will ruin all the effort as the primer would not work.
Apply the finishing layer
After applying all the coating on the balcony surfaces, you need to use a last layer protection material. For this, you can utilize UV-resistant and non-fading waterproofing products.
Bottom Line
If you follow the above steps, you can waterproof your balcony effectively. But as told before, it is always advisable to hire a reputed contractor. Though balcony waterproofing will cost a bit, it can save your balcony and entire property from several damages. Therefore, select the best material and begin the work to get a peaceful and healthy life.
